1. Knowledge Base
  2. Modules & Add-ons

RTK Setup: System Installation (M200)

Step 1: Install antennas using 3M double-sided tape, and your included mounting kit.

The color-coded "red" antenna should be installed on the port side of the aircraft. The color-coded black antenna on the starboard side of the aircraft.

Option 1 (DJI Antenna Brackets):

For additional instructions on how to install DJI antenna brackets click here

IMG_2822.JPG

Option 2 (Custom Antenna Bracket):

Install using included screws, and the available mounting points on top of the M200 RTK or M200 V2. Make sure the bracket is oriented so the antenna masts fold back along the aircraft.

M210 RTK V2 Antenna Mount (2)

Step 2: Attach AIS to the included mounting bracket

IMG_2773

 

IMG_2774

Step 3: Attach AIS with installed mounting bracket to M200. The needed screws are pre-installed on the aircraft.

IMG_2778 (2)

IMG_2824

Step 4: Attach radio to M200 with included adhesive tape.

IMG_2785

 

IMG_2786

 

IMG_2787

 

IMG_2789

 

IMG_2791-2

Step 5: Attach sensor to DJI SKYPORT by aligning the white dot on the sensor to the red dot on the drone. Insert and twist sensor counterclockwise to lock. Press button and twist clockwise to release.

Step 6: Attach antenna cables to their color coded ports on the sensor.

IMG_2765

 

IMG_2769

Step 7: Attach included cable to installed radio, sensor, and AIS.

IMG_2784

 

IMG_2792-2

 

IMG_2794-2

 

Cable

 

IMG_2824

Step 8: Attach base station to tripod. Connect radio to base station using included cable. Make sure the side labeled "Host" is connected to the base station and side labeled "Cable Creation" is connected to the radio.

IMG_2806

 

IMG_2808